Missing view orientations in model
When I create a new model and then go to change to a different view, Front, Right, Back, etc., all I have available to choose from is Standard Orientation and Default Orientation.Is there a setting I...
View ArticleHelp with search_path
Hello, I have been on Wildfire 3 for years. I was finally updated to Creo 3 a few weeks ago. I have been having trouble with search_paths. Today it is getting serious. I have been able to work...
View ArticleClik here to view.
working directory on startup?
Hello, I would like to startup CP 3.0/4.0 and automatically be in a specific working directory drive instead of C:\Prostart (We currently do not use a PDM server). I can't find any setting in my config...
View ArticleClik here to view.
Model was imported in simple mode?
Does anyone understand what, if anything, this does to a part? Someone from elsewhere opened some of our parts and when doing a File History we see the following displayed: "Model was imported in...
View ArticleAssembly mass literally 10^10 higher
This one has me stumped as I do the same process of all imported files. I have an imported assembly that has hundreds of small parts all of which have density set to 1.0E-10. The part has a weight of...
View ArticleClik here to view.
How to edit Creo AR modle information
Hi all, In Creo 4.0 M010,It can creat ThingMark,and Print ThingMark.When I publish modle,it can scan in Thingworx view by iphone,But it can only scan modle,have no other informations,I search some...
View ArticleClik here to view.
Remove fictive edges
Hello, how can I delete the fictive (non realistic) edges caused by fillet options? When I prepare the geometry in Simulate module, the mesh quality reduces caused by these edge. Is there any possible...
View ArticleClik here to view.
What happened in Creo 4 M010 drawings when you need to adjust the distance of...
What happened in Creo 4 M010 artwork when it is necessary to set the spacing of lines in the choice of cut in gray always worked not now
View ArticleClik here to view.
Cannot exclude internal components from shrinkwrap on envelope part creation
I have an assembly that is a box filled with goodies. I am looking to have the envelope just be the outside of box and the jacks. When I do a shrinkwrap in a part, autocollecting solid surfaces and...
View ArticleAnnoying Little 'X'
the little 'x' mark circle in red come out whenever i press 'sketch' on a datum plane making it hard for me to do the dimension.. anyway to remove it ?
View ArticleClik here to view.
Can we make filters and menu options alphabetical?
One of the dumb things Creo does is display choices non-alphabetically. This is probably best for some menu choices. It is not for Filters and other areas. I know we can define our own filters list...
View ArticleClik here to view.
offset lines how do you get them to display in the drawing view ?
Hi All I working on Creo 3 build m120 can create in model exploded view but will not appear in the drawing view
View ArticleTEMPLATE ASM AND DRW
Good morning,i'm to trying to make a template asm and drw in order to create different version of the same file. what i did until now:create template asmcreate template drw with the same name of...
View ArticleClik here to view.
How to get a flat pattern for swept Blend?
In sheet metal i'm having one part. It Unable to get a flat pattern in CREO 3.0.
View ArticleVanishing BoM Balloons
We have a couple of drawings with exploded views. The Repeat region was changed from flat to recursive during the course of creation and no problems were detected while putting on the BoM balloons for...
View ArticleClik here to view.
Copying Parameter Values from Part to Drawing (Creo 3.0)
How can I automatically copy parameter values from a part to a drawing on Creo 3.0?
View ArticleExecute the Copy Geometry (which has INPUT)
Let me explain :-) I have an assembly with a part. That part has some Copy Geometry. The source has an INPUT parameter.When I regenerate the assembly, the Copy Geometry will ask for the values of that...
View ArticleThe instruction to create a multi line section view
Hi allWhat are the instructions to create a multiple line or inclined section view. Should I always create a reference plane in the model first ? Or is it possible to sketch directly in the the...
View ArticleClik here to view.
import a pdf into the sketch mode
Does someone knows is it possible? In case, how...?Thanks!!!
View Article