Sketcher dimensions
Item 1:Is there a config setting that will hold sketcher to a normal amount of decimal places? I have in my config the default_decimal_places set to 3 but sketcher has 12 decimal places when I create a...
View ArticleClik here to view.
Punch form, exclude surfaces
Hello! I have made a Punch tool off a form that I repeatedly use in Sheetmetal. I use it to make holes. The form has a lot of surfaces. When I want the command to work, I have to select all of the...
View ArticleHow to change the spline line properties in partial view in 2 d
How to change the spline line properties in partial view in 2 d ex: i want to set the partial line boundary like phantom , centreline or so on ?
View Articlebend unbend of hollow pipe
I am trying to creat elbow but it is require to give both dimensions for unbend and bend pipe.Also want to show in Pro-detailing.but I am not getting how to do it.
View ArticleAssign Mass at point/coordinate system?
I have an IGES model from a supplier for a piece of equipment that will be used on a tractor. The model imported as a set of surfaces so the model mass and center of gravity are currently incorrect. I...
View ArticleRevolve Tool
Hi,Is it possible to use the revolve tool on a curve created with the style tool (from surfaces in the model tab)? I can revolve a simple curve created with the sketch tool, but not with the style...
View ArticleLissage Parallel , Rotationet general
J' ai intallé une version d 'évaluation de CREO 2 mais malheureusement je n'ai pas les options de lissage parallel en rotation ou general est-ce que cela provient de la config de base de CREO ou il...
View ArticleClik here to view.
Creating angular and diametral quotations
Hello, how do you create angular and diametral quotations with creo parametric ? Here is the project I'm working on : When I quotate with the tool 'quotation', it only quotates radius of the...
View Articlegetting started - viewport question
Everything in the viewport disappears when I start a new action. I have to move the view (pan, zoom, or etc.) to see anything again. Is this a settings issue or a computer issue? I have been using...
View ArticleHow to increase the string length in reliabilty prediction in prism parts
How to increase the string length in reliabilty prediction in prism parts ?
View ArticleNeed help with editing imported files into creo elements pro school edition
Hi everyone, i am doing a project in which i am required to design a case/ tablet holder and the product i have chosen is the iPad mini, i have downloaded the STEP file from the internet and have...
View ArticleModelling of Rubber components
Hello PTC team, Here in my organization we want to create a rubber boot. For that boot when it is called in an assembly we want to change it's length & 2 diameters but at the same time want to keep...
View Articlepart change requires revision of assembly?
We are using Windchill 9.1 and WF5.0. A user has an assembly consisting of a guard door, a hinge, and a frame. The hinge is mounted to the frame and the door is mounted to the hinge. All parts are...
View ArticleClik here to view.
Helical Sweep, Ball and Worm Gear Assembly
I created ball raceway with helical sweep cut. I can't manage to assembly 20 balls onto the raceway. All balls must touch each other and must be tangent to the worm gear. I tried to get curve from...
View ArticleClik here to view.
Help: Creo 2.0 Save a Copy, drw has lost parameters.
I require help. I have created a drawing template that calls parameters from Windchill 10.1 (3D Model state: &PROI_RELEASE and rev: &PTC_WM_VERSION, drawing state: &PROI_RELEASE:D, ver:...
View ArticleImporting DXF without losing text.
Hi I was wondering whether there's away of import DXF into Creo 2.0 without losing the text. The only way I have found so far to do this import the DXF into a drawing then save it as a DXF but changing...
View Articlehow to save efx extension file
i am facing a problem in saving efx extension file . file is attached
View ArticleWelds in Drawings?
Hey all, I've modeled welds into my assembly using the Weld Application, and I would like the associated symbols to appear in the drawing I've created for it, however I don't want the weld surface...
View ArticleCosmetic Thread Line Weight in Drawing Creo Parametric 2.0
Hey all, I've searched around for a solution to this but am coming up empty and could use your help. I've got a bunch of screw machine parts with a variety of threads. I'd like to use cosmetic...
View Articlesolid part to sheetmetal
Is it possible to change a solid part into sheetmetal, without loosig any face?
View Article